Hdhomerun for windows 10

Author: g | 2025-04-23

Downloads. HDHomeRun Software. HDHomeRun App for Windows 10/11 – opens Windows Store HDHomeRun App for iPhone/iPad – opens iTunes Store HDHomeRun App for Android –

HDHomeRun for Windows 10 for Windows - CNET

A Kodi-based home theater PC is great for watching your ripped or downloaded videos, but even if you’ve cut cable from your life, there’s still a time and place for live TV–like sports. Not to mention recording shows onto a DVR. Here’s how to watch and record live TV from Kodi on Windows. What You’ll Need In order to watch live TV on a Windows PC, you’ll need a TV tuner to hook up to your antenna or cable box. There are plenty of TV tuners out there, and which you use depends on what you’re trying to do. RELATED: 5 Alternatives to Windows Media Center on Windows 8 or 10 If You Use an Antenna If you’re just watching broadcast TV from an antenna, we’ve had good experience with Hauppauge’s line of PCI tuners. Grab the WinTV-HVR-1265 ($70) for a good cheap option that can record one show at a time. If you want to record two shows at once, or watch one show while recording another, you’ll want the WinTV-HVR-2255 dual tuner ($112 for the boxed version, $99 for the OEM version that doesn’t include the software). You don’t need the software, but it can be helpful if you’re running Windows 8 or 10, as you’ll see later in the guide. Helpful, but not necessary. These install into your PC just like any other expansion card (like a video card), so it should be a five minute task. If you’re using a laptop, you’ll probably need to use Hauppauge’s USB tuner ($65) instead. If You Have Cable Cable TV is a bit more complex. Since most cable signals are encrypted in the US, you’ll need a TV tuner that supports a CableCARD. The SiliconDust HDHomeRun Prime ($130) comes highly recommended for this purpose. Unlike the Hauppauge tuners, which you install directly into your PC, the HDHomeRun is a separate unit. You’ll need to have your cable company come to your home and install a CableCARD into the HDHomeRun, then hook the HDHomeRun up to your computer with an ethernet cable. You may want to check with your local cable provider to see if their cable signal is encrypted. If it isn’t, the Hauppauge tuners may work fine for you. But in our experience in the US, a CableCARD-equipped HDHomeRun is necessary more often than not. The Software Kodi can’t watch live TV on its own. It needs what’s called a “backend” to decode the broadcast signals from your antenna or cable box. Then, Kodi will connect to that backend through an add-on, and provide the “frontend”–the interface you use to browse channels and watch TV. We’ll be using the NextPVR software for Windows as our backend, since it’s

Windows 10 – Live TV - HDHomeRun

On Demand Streaming You can stream HDHomeRun on Roku. Here’s how to sign up, download, install, and start streaming HDHomeRun using your Roku. Learn how to get the most out of your Roku while using HDHomeRun. Can you stream HDHomeRun on Roku? How to Sign Up and Download HDHomeRun on Roku Click here to sign up for HDHomeRun.Once you’ve signed up, go to the Home Screen on your Roku.Launch the app store and search for “HDHomeRun” on your Roku.Select “Add to Home” to install the app.Once installed, log in using your HDHomeRun credentials.You can now stream HDHomeRun on Roku. HDHomeRun HDHomeRun is the app used to watch live TV if you have a HDHomeRun device. Those devices attach to an antenna and broadcast the TV signal on your Wi-Fi network. Depending on your location, this can provide free access to channels like ABC, CBS, Fox, NBC, Telemundo, The CW, and Univision.…The interface is quite clunky. If you have a HDHomeRun device, you’re more likely to appreciate the interface on Plex. Plex can access the channels provided by HDHomeRun and offer a more pleasing GUI. How to Sign Up for HDHomeRun on Other Streaming Devices If you have other devices, you can learn how to sign up for and use HDHomeRun on Amazon Fire TV, Apple TV, Google Chromecast, Android TV, iPhone/iPad, Android Phone/Tablet, Mac, Windows, Xbox, Sony Smart TV, and VIZIO Smart TV. TV Shows Once your HDHomeRun device is connected to an antenna and router, you’ll be able to watch free, unlimited TV — if your antenna can pick up the signal, you can watch it on the HDHomeRun app. HDHomeRun HDHomeRun is the app used to watch live TV if you have a HDHomeRun device. Those devices attach to an antenna and broadcast the TV signal on your Wi-Fi network. Depending on your location, this can provide free access to channels like ABC, CBS, Fox, NBC, Telemundo, The CW, and Univision.…The interface is quite clunky. If you have a HDHomeRun device, you’re more likely to appreciate the interface on Plex. Plex can access the channels provided by HDHomeRun

Download hdhomerun app for windows 10

Before you continue, make sure you have the following:The following instructions are for manual install and configuration of the HDHomeRun RECORD engine on a Linux machine. These instructions are intended for experienced users who want to experiment. Create a folder for recordings. For example from the command line you could do, mkdir HDHomeRun which will create a folder called “HDHomeRun” in your default user directory. Enter the new folder: cd HDHomeRun Download the latest HDHomeRun RECORD for Linux release using the wget command or a desktop GUI/browser Copy to the recordings folder and rename “hdhomerun_record”. Create a configuration file hdhomerun.conf in the recordings folder. Add the line: RecordPath= To do this from the command line, use the commandnano hdhomerun.conf for this example we will write in RecordPath=/home//HDHomeRun/ for a Debian-based system press control key+x to exit, then press Y then enter to save. Make the file executable: chmod +x hdhomerun_record Start the HDHomeRun RECORD engine:./hdhomerun_record start./hdhomerun_record status To start from a different directory: //hdhomerun_record start --conf //hdhomerun.conf//hdhomerun_record statusCheck the log file.The progress release builds of the record engine generate detailed log files by default. The log files are placed in the HDHomeRun directory and are named YYYYMMDD.log (UTC time). Note that all timestamps in the log files are in UTC time, not local time.No log file - this usually means the record engine was not able to find the config file, was not able to find RecordPath in the config file, or the path specified doesn't exist. dvr linux Last modified: 2019/12/28 08:26 Log In. Downloads. HDHomeRun Software. HDHomeRun App for Windows 10/11 – opens Windows Store HDHomeRun App for iPhone/iPad – opens iTunes Store HDHomeRun App for Android –

HDHomeRun for Windows 10 - CNET Download

API because many years no any problems with BDA parts. But single tuner DVB C/T devices like ASTROMETA is not typical for ProgDVB. Because 2 tuners = 2 different tuner filters. Re: Problem with HDHomeRun DVB-T #10 by EMost66Prog wrote:I am not sure about new API because many years no any problems with BDA parts. But single tuner DVB C/T devices like ASTROMETA is not typical for ProgDVB. Because 2 tuners = 2 different tuner filters.Sure! In GraphEdit I see TWO different tuners! But one for each tuner, no one for each tuner space (i.e. no one DVB-T and one DVB-C for each tuner). The problem ins't the dual tuner, the problem is the multiple tuner space support. If you read the documentation the "old" BDA API ins't compatible with some devices. The solution is use the new "Microsoft Network Provider" that is agnostic about the tuner space. Moreover, old API is DEPRECATED by Microsoft, see ... s.85).aspxI hope you can use this new API as it will be easy for you!Cheers! Re: Problem with HDHomeRun DVB-T #11 by EMost66Hi Prog,After more tests with GraphEdit I do this:1) Open GraphEdit.2) Instantiate filter "Microsoft DVBT Network Provider"3) Instantiate filter "Silicondut HDHomeRun Tuner 11111111-0"4) Connect "Antenna Out" pin to "Input0" pinAnd it works! So the problem can be the dynamic change of the tuner space incorporated in the filter. The logs show that you first try DVB-S, then DVB-C, then DVB-T and finally ATSC. So, please, can you try to use only one network provider and disable autoconfig? Or provide the option to change the order of tests (if first try DVB-T I feel the driver will initialize without troubles).I don't know where is the problem, but I feel is not very complex to fix. It's possible to generate more verbose BDA logs? Re: Problem with HDHomeRun DVB-T #12 by ProgYou can try rename device name to "xxxx - DVB-T" for force DVB-T using. Re: Problem with HDHomeRun DVB-T #13 by EMost66Prog wrote:You can try rename device name to "xxxx - DVB-T" for force DVB-T using.Hi Prog,Where I can rename it? In ProgDVB all options are disabled... I only see "{BDA} Silicondust HDHomeRun Tuner" and "{BDA} Silicondust HDHomeRun Tuner" and only enable/disable checkbox is available.Please, help me to enable this device! Re: Problem with HDHomeRun DVB-T #14 by ProgI am mean on driver level (in inf file or registry) Re: Problem with HDHomeRun DVB-T #15 by EMost66Prog wrote:I am mean on driver level (in inf file or registry)Sorry? The name of the driver is defined by the manufacturer, no?I can't found how to change the name in the Windows registry. Please, can you provide more debug level or force tunning? I can

Windows 10 Live TV - HDHomeRun

Keeper05 Offline Posts: 3 Threads: 1 Joined: Dec 2015 I am having issues with my Intel NUC 54250 (Intel HD 5000 and Core I5 running Windows 10) and playing live tv through nextpvr, well through any other PVR for that matter. The only way I have a trouble free experience is via DLNA or the HDHomerun view app. When I use Kodi to view the live stream or NextPVR, I experience the same issue. You can see the line that cuts through her dress. These lines continuously show up at random and they are accompanied by audio glitches. I have updated chipset drivers, audio drivers, graphics drivers, BIOS etc.....I have used a whole host of codecs. Nothing is issue free. Cyberlink PowerDVD 12 and 13 don't have the artifacts but are really slow and choppy. This machine is definitely powerful enough to serve as a backend. It is not an issue with reception because I have plus 90% on most channels. Any help would be greatly appreciated. sub Offline Administrator NextPVR HQ, New Zealand Posts: 106,483 Threads: 767 Joined: Nov 2003 Artifacts like that image are usually as a result of reception issues, or more specifically missing bits of data. In the case of an HDHomeRun tuner, I guess it could be either reception issues, or network packets dropped. If the latter, wired vs wireless, and main application set in HDHomeRun utility may be a factor. keeper05 Offline Junior Member Posts: 3 Threads: 1 Joined: Dec 2015 sub Wrote:Artifacts like that image are usually as a result of reception issues, or more specifically missing bits of data. In the case of an HDHomeRun tuner, I guess it could be either reception issues, or network packets dropped. If the latter, wired vs wireless, and main application set in HDHomeRun utility may be a factor.That is what I originally thought, but my signal strength for almost every channel is at least over 90% and at 100 for most of the the main channels. If it were reception I would think the issue would be there when streaming via dlna from the HDHomerun, except it runs flawlessly. My BDA compatibility mode is set to default and not NextPVR. Since I have the newest software, there is no main application My network is all wired. I appreciate your input. sub Offline Administrator NextPVR HQ, New Zealand Posts: 106,483 Threads: 767 Joined: Nov 2003 keeper05 Wrote:If it were reception I would think the issue would be there when streaming via dlna from the HDHomerun, except it runs flawlessly. My BDA compatibility mode is set to default and not NextPVR.You may find setting it to NextPVR helps, since the data transfer rates will be reduced, and

Free hdhomerun Download - hdhomerun for Windows

If you are using NextPVR v5 or later, the instructions for setting up an HDHomeRun will be different. Download and install the latest HDHomeRun software from downloads. Open HDHomeRun Setup. On the Tuners tab, select the correct signal source for your tuners. On the tab corresponding to your signal, click Scan. Click OK. Open NextPVR. Right click on the NextPVR window and select Settings. Click on Devices on the left side. Click on the QAM/ATSC/DVB-T/DVB-C Silicondust HDHomeRun Tuner xxxxxxxx-0 entry appropriate for your signal source and then click Device Setup. Do not use the HDHR entry. For DVB-T/DVB-C, select the correct country and region, or All Frequencies. For ATSC, select All Channels. For US clear QAM, select Default Cable Frequencies or HRC Cable Frequencies as appropriate for your area. Click Scan. If you are using HDHomeRun EXTEND with transcode activated, after the scan finishes, double click on a channel, change the Service Type to H.264 HD, and click OK. Repeat for all channels. Click OK, then click OK again. Click on the entry for the next tuner and click Device Setup. NextPVR should report that the card hasn’t been setup, but that another card has and ask if you want to copy the channel information over. Click Yes. Repeat for any other tuners you want to set up. For DVB users or ATSC/QAM users wanting to use the broadcast EPG data, click on Channels on the left side and click Update EPG. For Schedules Direct users, see the SchedulesDirect section. Click OK. Exit NextPVR. Reopen HDHomeRun Setup. On the Applications tab, set the Main Application to NextPVR. Click OK. Download and install the latest HDHomeRun software from downloads. Open HDHomeRun Setup. On the Tuners tab, set the Signal Source to CableCARD for each of your HDHomeRun PRIME tuners. On the

HDHomeRun for Windows 10 for Windows - CNET Download

Problem with HDHomeRun DVB-T #1 Hi,I like to use ProgDVB with my HDHomeRun DVB-T network tuner: works great with other software, like Windows Media Center, DVBViewer, TSReader, etc.But, when I try with ProgDVB I have this error: "[{] Device not started!"This is the content of "BDA.log" (MAC address changed to 11111111):15:41:15.118 - Start logging...15:41:15.118 - GetBdaTunerList15:41:15.119 - tuner Silicondust HDHomeRun Tuner 11111111-0 - - 15:41:15.129 - Silicondust HDHomeRun Tuner 11111111-0 ex:56781 type:Unknow type 015:41:15.129 - tuner Silicondust HDHomeRun Tuner 11111111-1 - - 15:41:15.138 - Silicondust HDHomeRun Tuner 11111111-1 ex:56782 type:Unknow type 015:41:15.138 - GetInfo 215:41:15.138 - CreateExtApi default15:41:15.139 - GetModuleInfo {BDA} Silicondust HDHomeRun Tuner 11111111-0 5678115:41:15.139 - exIndex 015:41:15.139 - maxfilters 12815:41:15.139 - caps 20030415:41:15.139 - PossibleStart 115:41:15.140 - CreateExtApi default15:41:15.140 - GetModuleInfo {BDA} Silicondust HDHomeRun Tuner 11111111-1 5678215:41:15.140 - exIndex 115:41:15.140 - maxfilters 12815:41:15.141 - caps 20030415:41:15.141 - PossibleStart 115:41:17.049 - GetInfo 215:41:17.049 - CreateExtApi default15:41:17.049 - GetModuleInfo {BDA} Silicondust HDHomeRun Tuner 11111111-0 5678115:41:17.049 - exIndex 015:41:17.050 - maxfilters 12815:41:17.050 - caps 20030415:41:17.050 - PossibleStart 115:41:17.050 - CreateModule 5678115:41:17.050 - CBDAManager15:41:17.050 - BDAManager::Start 5678115:41:17.050 - index 015:41:17.050 - CreateExtApi default15:41:17.050 - BuildGraph15:41:17.054 - LoadNetworkProvider DVB-S15:41:17.062 - GetTunerSpace DVB-S15:41:17.062 - CTuneRequestSwitchManager::SetDefaultTunerRequst apply err Error in put tuner request15:41:17.062 - Error in default request!15:41:17.062 - Connecting NetworkProvider -> Silicondust HDHomeRun Tuner 11111111-0 ... ERROR!!!15:41:17.063 - LoadNetworkProvider DVB-C15:41:17.066 - GetTunerSpace DVB-C15:41:17.067 - CTuneRequestSwitchManager::SetDefaultTunerRequst apply err Error in put tuner request15:41:17.067 - Error in default request!15:41:17.067 - Connecting NetworkProvider -> Silicondust HDHomeRun Tuner 11111111-0 ... ERROR!!!15:41:17.067 - LoadNetworkProvider DVB-T15:41:17.071 - GetTunerSpace DVB-T15:41:17.071 - BW: 015:41:17.071 - Connecting NetworkProvider -> Silicondust HDHomeRun Tuner 11111111-0 ... ERROR!!!15:41:17.071 - LoadNetworkProvider ATSC15:41:17.074 - GetTunerSpace ATSC15:41:17.075 - Connecting NetworkProvider -> Silicondust HDHomeRun Tuner 11111111-0 ... ERROR!!!15:41:17.075 - !!!BuildGraph error Cannot connect network provider15:41:17.075 - TearDownGraph OK15:41:17.305 - ~CBDAManager15:41:17.305 - PowerOff15:41:17.305 - Stop15:41:41.413 - GetInfo 215:41:41.413 - CreateExtApi default15:41:41.414 - GetModuleInfo {BDA} Silicondust HDHomeRun Tuner 11111111-0 5678115:41:41.414 - exIndex 015:41:41.414 - maxfilters 12815:41:41.414 - caps 20030415:41:41.414 - PossibleStart 115:41:41.414 - CreateExtApi default15:41:41.415 - GetModuleInfo {BDA} Silicondust HDHomeRun Tuner 11111111-1 5678215:41:41.415 - exIndex 115:41:41.415 - maxfilters 12815:41:41.415 - caps 20030415:41:41.415 - PossibleStart 115:41:45.420 - GetInfo 215:41:45.420 - CreateExtApi default15:41:45.421 - GetModuleInfo {BDA} Silicondust HDHomeRun Tuner 11111111-0 5678115:41:45.421 - exIndex 015:41:45.421 - maxfilters 12815:41:45.421 - caps 20030415:41:45.421 - PossibleStart 115:41:45.421 - CreateExtApi default15:41:45.422 - GetModuleInfo {BDA} Silicondust HDHomeRun Tuner 11111111-1 5678215:41:45.422 - exIndex 115:41:45.422 - maxfilters 12815:41:45.422 - caps 20030415:41:45.422 - PossibleStart 1The device is DVB-T/C and the tunning space selected in the config is DVB-T. So, please, can you provide a fix?Thank you! Re: Problem with HDHomeRun DVB-T #2 by Prog Re: Problem with HDHomeRun DVB-T #3 by EMost66Hi,I readed all the other post, and it's not related at all! The Setup of the HDHomeRun software has the Tuner option. Downloads. HDHomeRun Software. HDHomeRun App for Windows 10/11 – opens Windows Store HDHomeRun App for iPhone/iPad – opens iTunes Store HDHomeRun App for Android – Downloads. HDHomeRun Software. HDHomeRun App for Windows 10/11 – opens Windows Store HDHomeRun App for iPhone/iPad – opens iTunes Store HDHomeRun App for Android –

HDHomeRun for Windows 10 Registration Key - 7t7exe.com

설명 기술 편집 Enjoy streaming live TV from HDHomeRun to your Android Tablet, Phone, or TV devices with ease.Key Features:Supports all HDHomeRun models, including legacy models like HDHR3-US, HDHR2-US, and HDHR3-EU.TV Guide support available in selected countries with HDHomeRun DLNA models (Connect, Extend, and DVB-T2).Full Hardware MPEG2 & H264 decoding capabilities on Android Media Players based on RockChip/AMLogic/AllWinner SOCs.Full Hardware MPEG2 & H264 decoder compatibility with Kindle FireTV Box.Full Hardware H264 decoding for most Android devices when paired with a HDHomeRun Extended.High-performance software decoder provided for devices lacking a Hardware decoder; HD software decoding requires Nvidia Tegra 4+/Qualcomm Snapdragon 600+/Intel Atom 3xxx+.Channel grid overlay for quick and easy channel surfing.Complete Gesture, Keyboard, Remote Control, and Gamepad navigation support.Automatic synchronization of favorite channels from your HDHomeRun device.Supported HDHomeRun models include:HDHomeRun DUAL US&CA (HDHR3-US & HDHR2-US)HDHomeRun DUAL EU (HDHR3-EU)HDHomeRun PRIME (HDHR3-CC)HDHomeRun EXTEND (HDTC-2US)HDHomeRun CONNECT (HDHR4-2US)HDHomeRun 4DC (HDHR3-4DC)Please Note:Use the "Type A" decoder to enable MPEG2 & H.264 Hardware decoding for most Android Media Box/Stick devices utilizing RockChip/AMLogic/AllWinner SOCs without needing an HDHomeRun Extended.Not all video/audio codecs are supported, and certain features may require an In-App Purchase.HD video Software Decoding is supported on devices equipped with Nvidia Tegra 4+/Qualcomm Snapdragon 600+/Intel Atom 3xxx+/Rockchip RK3288+ processors.For HD video streaming, WIFI AC or WIFI N running on 5Ghz is recommended. A wired network connection is preferred for the best performance.Slow devices with WiFi G Wireless are limited to SD video quality.Tegra2 devices such as Moto Xoom and Asus Transformer 1 are not compatible.For more information, please visit 개요 InstaTV 범주 오디오 & 멀티미디어 KeYi Tech Inc.개발한에서 Freeware 소프트웨어입니다.InstaTV의 최신 버전은 2024-04-09에 발표 된 2015070101. 처음 2024-04-09에 데이터베이스에 추가 되었습니다.다음 운영 체제에서 실행 되는 InstaTV: Android. InstaTV 하지 평가 하고있다 우리의 사용자가 아직. 스크린샷 (클릭) 큰 볼 안전하고 무료 다운로드 UpdateStar에 의해 확인 최신 리뷰 브라 우즈

Download hdhomerun app for windows 10 - uploads.strikinglycdn.com

Tuners tab in HDHomeRun Setup, click on one of the Tuner IDs to access your HDHomeRun PRIME’s webpage. This can also be done by clicking the link on the Device tab in HDHomeRun Config GUI, or by directly navigating to the IP address of your HDHomeRun. Click on CableCARD Menu. In the CableCARD Status section, you will see the current status of the CableCARD in your HDHomeRun PRIME. Verify that Card Authentication and Card OOB Lock show success. If Card OOB Lock does not show success, this suggests that your HDHomeRun PRIME does not have a good cable connection. Verify that the TV cable is securely connected to the RF in port on your HDHomeRun PRIME and to the wall outlet or splitter. Follow your cable provider’s directions for validating your CableCARD. This normally involves calling the cable company or accessing a web page and providing the CableCARD ID and Host ID (and if using a Motorola CableCARD, the Data number) listed on this page. The validation process can take anywhere from 1-30 minutes depending on the cable provider. Refresh the Status page every few minutes to check to see if the process is complete, indicated by the Card Validation status showing success. On the CableCARD tab, click Scan to complete a channel scan. Click OK. Open NextPVR. Right click on the NextPVR window and select Settings. Click on Devices on the left side. Click on the HDHR DCR-2650 / HDHR PRIME xxxxxxxx-0 entry and then click Device Setup. Do not use any ATSC or QAM entries that may be present. Click Scan Uncheck any channels you do not want to be available in NextPVR, such as those that are marked as copy-protected by your cable provider. Click OK, then click OK again. Follow the instructions in the Schedules Direct. Downloads. HDHomeRun Software. HDHomeRun App for Windows 10/11 – opens Windows Store HDHomeRun App for iPhone/iPad – opens iTunes Store HDHomeRun App for Android – Downloads. HDHomeRun Software. HDHomeRun App for Windows 10/11 – opens Windows Store HDHomeRun App for iPhone/iPad – opens iTunes Store HDHomeRun App for Android –

HDHomeRun for Windows 10 para Windows - CNET Download

For select the Surce Type (Digital Antena=DVB-T or Digital Cable=DVB-C), so the problem isn't the tunning space.Moreover, when I try to enable the device an ERROR Window appears, with the message "[{] Device not started!". Then I can't configure anything of the device driver (options button disabled).Perhaps the problem is on BDA Demulator type. I found this document: ... opment.pdfIn section "II.Windows BDA Drivers" it explains the implementation of the BDA driver.At some page in the document it says:Many third party BDA applications continue to use the older “Microsoft XXXX Network Provider”components for compatibility with XP. This has the advantage of supporting XP, but thedisadvantage of not being able to programatically detect if an ATSC tuner supports US-QAM.Unfortunately the conflicting combinations mean that it is not possible for a driver to publish oneset of features. To solve this problem the HDHomeRun BDA driver will auto-detect which networkprovider(s) are part of the graph and use this detection to select which demodulator nodes topublish.It is recommended that an application attempt to use the universal “Microsoft Network Provider”component, and only use the “Microsoft XXX Network Provider” components if the universalcomponent fails to instantiate.I hope soon ProgDVB will be compatible with HDHR DVB-T/C. Re: Problem with HDHomeRun DVB-T #4 by ProgIs it work if selected only one device? Re: Problem with HDHomeRun DVB-T #5 by EMost66Prog wrote:Is it work if selected only one device?Hi Prog,I only select one device! And when I select the device the error window appears. The log file is after these steps:1) Open ProgDVB2) Go Device Options3) Enable one HDHR device (error window)4) Close ProgDVBAs I understand from the documentation you are using the BDA Interface with XP compatibility, but the recomendation is first try the most recent BDA Interface, and if fails then try the XP Interface. Can be this the problem? Re: Problem with HDHomeRun DVB-T #6 by ProgBut you have 2 devices in TV sources? Can you enable other device? Re: Problem with HDHomeRun DVB-T #7 by EMost66Prog wrote:But you have 2 devices in TV sources? Can you enable other device?Hi,After first error window when I enable first device...1) I enable second device2) Error Window: ""[{] Device not started [{] Device not started"So identical behaviour with both devices! Re: Problem with HDHomeRun DVB-T #8 by EMost66Hi,Perhaps this helps:I try to execute GraphEdit and I instantiate filter "Silicondust HDHomeRun Tuner 11111111-0". Then I instantiate two modules "Microsoft DVBT Network Provider" and "Microsoft Network Provider". The first one REFUSES to connect to input0 pin of HDHR Tuner0 filter; but second CONNECTS without problems.So, are you using old XP interfaces for BDA tuners, or the new one? Re: Problem with HDHomeRun DVB-T #9 by ProgI am not sure about new